1601 Pacific Coast Hwy • Suite 290 • Hermosa Beach • CA • 90254
www.simblee.com • Tel: 949.610.0008 • [email protected]
Document – Copyright 2017 RF Digital Corporation – March 8, 2017
CONFIDENTIAL – INTERNAL USE ONLY
7
Press Button A (the Left Button) to
start the pairing. The LED will change
color to Blue indicating it is waiting to be
paired. Bring the second node, within
~1ft. When in sufficient range, the LED
will flash green indicating a successful
pairing. The LED will then turn to white.
The intensity of the white LED will change
based on the distance measured by
the Simblee Time of Flight sensor. Brighter
light will indicate a father measured
distance. Dimmer light will indicate
a shorter measured distance.
Pairing and Using the Second Simblee Node
Figure 19 - Blue for Waiting to Pair
Figure 18 - Press Button A to
start Pairing
1601 Pacific Coast Hwy • Suite 290 • Hermosa Beach • CA • 90254
www.simblee.com • Tel: 949.610.0008 • [email protected]
8
Document
–
Copyright 2017 RF Digital Corporation
–
March 8, 2017
Pairing and Using the Second Simblee Node
Press Button A (the Left Button) to start the pairing. The LED will change color to Blue indicating it is waiting to
be paired. Bring the second node, within ~1ft. When in sufficient range, the LED will flash green indicating a
successful pairing. The LED will then turn to white. The intensity of the white LED will change based on the
distance measured by the Simblee Time of Flight sensor. Brighter light will indicate a father measured distance.
Dimmer light will indicate a shorter measured distance.
Figure 18 – Press Button A to start Pairing
Figure 19 – Blue for Waiting to Pair
1601 Pacific Coast Hwy • Suite 290 • Hermosa Beach • CA • 90254
www.simblee.com • Tel: 949.610.0008 • [email protected]
8
Document
–
Copyright 2017 RF Digital Corporation
–
March 8, 2017
Pairing and Using the Second Simblee Node
Press Button A (the Left Button) to start the pairing. The LED will change color to Blue indicating it is waiting to
be paired. Bring the second node, within ~1ft. When in sufficient range, the LED will flash green indicating a
successful pairing. The LED will then turn to white. The intensity of the white LED will change based on the
distance measured by the Simblee Time of Flight sensor. Brighter light will indicate a father measured distance.
Dimmer light will indicate a shorter measured distance.
Figure 18 – Press Button A to start Pairing
Figure 19 – Blue for Waiting to Pair
