MOON by Simaudio
Operating the MOON 340i
We recommend leaving your
MOON 340i
powered up at all times to maintain optimal
performance. When you plan on being away
for a few days, it may not be a bad idea
to power off your amplifier. Please keep in mind
that once fully “broken-in”, your
340i
requires
several hours of operation before reaching
optimal performance after powering it up again.
Turning on your MOON 340i for the first time.
Prior to turning the amplifier on for the first time,
make sure that every cable is properly connected
to avoid any problems. Flick the main rocker
switch, located on the rear panel, labeled
“POWER” to the “1” (on) position. The blue LED
on the front panel will blink for up to 10 seconds
while it achieves standby mode. When it stops
blinking and is not illuminated, your
340i
is in standby mode. Next, briefly press the push
button labeled “Standby” located on the front
panel. You will hear a very faint click sound
confirming that everything is in order. The blue
LED on the front panel will illuminate, indicating
that the
340i
is now powered up and ready
for use.
On and Off Sequence.
To avoid having any annoying noises (ie.
“thumps” and “pops”) emanate from your
speakers when powering your
340i
on or off,
you should always power up any source
components prior to powering up your
340i
.
As well, always power down your
340i
prior
to powering down any source components.
