Simaudio MOON 330A Owner'S Manual Download Page 4

MOON by Simaudio

Important Safety Instructions

10.  Protect the power cord from being walked on 

or pinched, particularly at plugs, convenience  
receptacles, and the point where they exit 
from the apparatus. Unplug mains cord during 
transportation.

11.  Only use attachments and accessories 

specified by the manufacturer.

12.  Use only with the cart, stand, tripod, bracket, 

or table specified by the manufacturer or sold 
with the apparatus. When a cart is used, use 

caution when moving the cart/
apparatus combination to avoid 
injury from tip over.

13.  Unplug this apparatus during lightning storms 

or when unused for long periods of time.

14.  Refer all servicing to qualified service 

personnel. Servicing is required when the 
apparatus has been damaged in any way, 
such as when the power cord or plug has 
been damaged; liquid has been spilled 
or objects have fallen into the apparatus; or 
the apparatus has been exposed to rain or 
moisture, does not operate normally, or has 
been dropped.

15.  No naked flame sources, such as candles, 

should be placed on the apparatus.

WARNING: 

TO REDUCE THE RISK OF FIRE OR 
ELECTRIC SHOCK, DwO NOT EXPOSE THIS 
APPLIANCE TO RAIN OR MOISTURE.

1.  Read these instructions.
2.  Keep these instructions.
3.  Heed all warnings.
4.  Follow all instructions.
5.  Do not use this apparatus near water.
6.  Clean only with a dry cloth.
7.  Do not block ventilation openings. Install in 

accordance with the manufacturer’s instructions.

8.  Do not install near any heat sources such as 

radiators, heat registers, stoves or another 
apparatus that produces heat.

9.  Do not defeat the safety purpose of the polarized 

or grounding type plug. A polarized plug has 
two blades with one wider than the other. A 
grounding-type plug has two blades and a third 
grounding prong.  
The wide blade or the third prong is provided for 
safety.  
If the provided plug does not fit into the outlet, 
consult an electrician for replacement of the 
obsolete outlet. 

Summary of Contents for MOON 330A



















Reviews: