Cleaning carpets and rugs
Accessories: carpet/floor brush (7)
and cloth (11) attached by the spring
clips.
Advice
: test for colour fastness and
fibre resistance on a concealed
section of reasonable size before
carrying out the full clean.
It is advisable to remove surface dust
first with a carpet sweeper or vacuum
cleaner and again after the carpet is
completely dry. This will remove dirt
at the bottom of deeper carpet pile
which has been loosened by the
steam.
Replacement cloths;
these can be
purchased from most supermarkets
or direct from the Service
Department. To save money - use old
towels or cotton floor cloths.
Cleaning hard floors
Accessories: carpet/floor brush (7)
and cloth (11) attached by the spring
clips.
Advice
: Not recommended for wax
treated floors or wood floors which
have been treated with non heat
resistant varnish.
For hard floors able to withstand the
high temperature of steam it is
possible to use the floor brush directly
on the surface without a cloth. This is
particularly useful on heavily soiled
floors. Go over the area afterwards
with the cloth attached to remove
loosened dirt.
Cleaning tile grout,
bathrooms, shower stalls,
toilets and hand basins
Accessories: crevice tool (12) with
scouring brush (9) then hand held
cloth to wipe up loosened dirt and
dry.
