Sima XL-72 Instruction Manual Download Page 3

Introduction

Congratulations on purchasing the XL-72 Theater by Sima Products. Please read this instruction manual 

carefully before installing your inflatable screen. When used properly according to this manual it will pro-

vide hours of entertainment for you and your family.

General Information and Warnings

• Do not over inflate. Use only the supplied air pump as directed. Never use an air compressor.

• This screen is not a flotation device, do not use in any type of pool.

• To avoid danger of suffocation, keep children away from the screen when inflating and deflating. Do not  

  let children sit or play on the screen. Always deflate and store screen immediately after use. Adult super  

  vision is required.

• Do not use screen during high winds in excess of 15 mph or threat of lightning.

• Do not smoke near the screen. Keep away from fire.

• Do not use sharp objects in any manner around the XL-72 Theater.

• Do not climb or sit on inflated surfaces.

• Clean only with mild soap and water. Do not use harsh chemicals.

Sima Products has researched all regulations regarding the use of this XL-72 Theater. We have not found 

any regulations related to the use of our screen; however we will not be responsible if some other regula-

tions apply to this product in the country you intend to operate the system. It is the users responsibility to 

be aware of such regulations and obey them. Sima Products will not accept any responsibility for failure to 

meet local regulations.

Model                                                    XL-72

Size Inflated                                       69” x 32” x  70”      (with pontoons)

                                                                  69” x 32” x  54.5”  (without pontoons)

Weight (approximate)                  28 lbs.

Page 3

Summary of Contents for XL-72















Reviews: