
1.
Base Unit
3
2.
Charge Status indicator 4
Note:
Adapter plates B and C each have a flip-up door
for use with certain batteries. See flip-up door for listing
of battery types.
.
Power Indicator
.
Batt. Adapter plate latch
Parts and Components
2
1
3
4
Plate A
Plate B
Plate C
See
note on
flip-up
door
below
Step 1 - Connect to AC Power Supply
Connect the AC adapter plug to the Power Input jack on
the rear of the SPM-13N. Plug the AC adapter into any
standard 120V AC household outlet. ( See diagram
above.) The red Power indicator light will turn on.
To 120V AC outlet
Power Input jack
Connect the 12V DC car cord plug to the power input
jack on the rear of the SPM-13N. Plug the cigarette
lighter adapter into the cigarette lighter socket of the
vehicle. (See diagram above.) The red Power indicator
light will turn on.
To car cigarette lighter
12V DC Car Power Supply
Power Input jack
notch
notch
notch
Step 3 - Mounting the Batteries
Fig. 3
Fig. 2
Fig. 1
Step 2 - Mounting the Adapter Plates
Some battery models will require the use of an
adapter plate (A, B or C). Consult the battery chart
in this manual to determine which adapter plate
your camcorder battery requires.
To install the adapter plates -
slide the
central notch on the adapter plate’s upper edge into
the slot on the upper edge of the charging bay
(Fig. 1), then press down firmly on the plate’s lower
edge (Fig. 2).
The plate will snap firmly in place. Install the battery
so the contacts on the battery meet the contacts on
the adapter plate. To remove the plate push down
on the battery/adapter plate latch.
Fig. 1
Fig. 2
To install the battery -
Align the contacts on your
battery with the appropriate contacts on the charger.
Typically you can install the battery onto the charger
plate the same way you install the battery onto your
camcorder. Follow the guides on the battery and the
charger.
TIP:
For some battery models, you will press the battery
straight down and then slide it up, away from the
indicator light, (Fig. 1). On others you will slide the
battery up and press it down (Figs.2 and 3).
Either way the battery should slide easily into place. If it
does not, do not force the battery into place. Realign the
guides and try again.