11
7.
MACHINE STARTING-UP AND USING INSTRUCTIONS.
7.1
POSITION OF THE MACHINE AND THE OPERATOR, CONNECTION AND DISCONNECTION
The machine needs to be installed in well illuminated, stable and plane surface, free from any obstacles.
Before starting-up the machine, we should have made all necessary safety measures (electrical connection,
stability, protections, etc….) as mentioned in the previous chapters.
When installing the machine, make sure the table on which it will be placed should be a horizontal, non bland
surface.
To start cutting, the operator should stand in from of the machine. In this position, the operator can easily
manage the cutting head and the piece to be cut. He/she will also have easy access to the electrical plug.
Once the power supply cable is connected, the motor and the water puma start-up only by pressing the green
switch button.
The machine can be stopped, simply by pressing the red switch button.
7.2
REALISING A STRAIGHT CUT.
1 Place the piece to be cut on the cutting table
making sure it remains stable
and laying against the
front ruler of the cutting table.
3 Once the height of the cutting head has been
adjusted and the piece placed on the cutting table,
start-up the engine and make sure the cooling is
adequate to the BLADE and material to cut. Using the
handle that embodies the BLADE safety guard, drag the
cutting head until the BLADE touches the piece to cut.
You need to start cutting slowly and maintain a constant
progress in function of the material to be cut.
7.3
REALISING A 45º CUT.
WARNING: Always incline the cutting bridge with motor switched off.
Loosen the blocking controls on
both sides of the machine Incline
the cutting bridge to select the
desired angle. Fasten back the
blocking controls
