Sim2 RTX 55, User And Installation Manual

Page: 10 / 40

10
•
AV GRAPHIC - RGB socket
Allows the INPUT of an S-Video signal, using a cable with a
mini-DIN type connector. The external appliance providing the
signal (typically a personal computer or video games console)
must be able to provide separate H/V or composite H+V syn-
chronisation signals. The video or graphic signals arriving at this
socket must have a horizontal scan (H-sync) rate between 15
and 110 kHz and a vertical scan (V- sync) rate between 40 and
100 Hz. Resolution can vary between 640x480 and 1600x1200
pixel (VGA, AVGA, XGA, SJXGA,UXGA).
Note:
The AV 3, AV DVD and AV GRAPHIC video input soc-
kets all have corresponding audio INPUT sockets (L and R)
associated with them.
Table 2
EXTERNAL DEVICE SIGNAL CONNECTOR
Aerial RF RF Antenna
Television receiver connected to Aerial Composite Video VIDEO
Satellite or Cable (Analogue or Digital) S-Video Y/C
Components YCrCb/RGB-SYNC
RGB YCrCb/RGB-SYNC
DVD player Composite Video VIDEO
S-Video Y/C
Components YCrCb/RGB-SYNC
RGB YCrCb/RGB-SYNC
Video recorder Composite Video VIDEO
S-Video Y/C
Camcorder Composite Video VIDEO
S-Video Y/C
Game console Composite Video VIDEO
S-Video Y/C
Components YCrCb/RGB-SYNC
RGB YCrCb/RGB-SYNC
RGB GRAPHIC INPUT
Computer RGB GRAPHIC INPUT
• SUBWOOFER socket
-
This provides an audio OUTPUT (low frequencies only) from
the television to an external subwoofer. The subwoofer must
have its own amplifier.
• HI-FI sockets - right and left channels
- These provide audio OUTPUT signals that can be fed into an
external hi-fi system.
Output sound levels can be adjusted by way of the OSD or
directly at the external hi-fi amplifier (for further details see
subsequent sections).