Silvio cruzbike, Assembly Instruction Manual, Page: 9 / 10

Silvio Assembly Manual Page 9
9. Fit the Front Triangle
Slider first to Pivot Clamp
Insert the Slider through the Slider Clamp.
Rotate the slider so the slot in the end is
underneath.
Connect the Slider Clamp to the Pivot Clamp
using the through pin.
Add the Boom Clamp to the end of the
Slider.
Then Boom & Chainstay
Insert the Boom into the Slider and place the
dropouts over the lugs on the fork dropouts.
Tighten:
• Ring Clamps
• The Headset Cap bolt
• Pivot Clamp bolts
• Slider Clamp
• Boom Clamp
Handlebar
The handlebar fits to the top of the
sliderwith two clamps and four bolts.
Important : Tighten the two Pivot Clamp
bolts after the front triangle is added.
Finishing touch
Apply the headbadge to the slider.
4
3
2
1
6
5
C
D
E
1
2
3
2
1
ITEM
NO.
PART NUMBER QTY.
1 Slider Body 1
2 Head Badge 1
3 Handlebar clamp A 2
4 socket head cap screw 4
5 Boom clamp 1
6 Slider clamp 1
ITEM
NO.
PART NUMBER QTY.
1 Boom clamp 1
2 socket head cap screw 1
ITEM
NO. PART NUMBER QTY.
1 Slider clamp 1
2 TL-301 Screw 1
7 Rear Stay 1