16. Place the hard disk drive bracket
with hard disk installed back on
top of cooling fan bracket and
secures it with screws.
10. Loosen the four screws that
secure the Raptor X bracket
11. Take out the Raptor X bracket.
12. Place the Raptor X in the bracket
and fasten the screws securely.
17. Loosen the screws that hold the
combo drive bracket in place.
18. First pull the combo drive
bracket towards the back
panel as pictured.
22. Place the bracket with optical
drive installed back in the
chassis, secure the bracket with
screws as pictured.
23. Install the power supply.
24. Re-install support brace and
then put the top panel back on
the case and secure it with 4
screws as pictured.
4. Place the motherboard over
standoffs and make sure
standoffs are securely tightened.
5. Loosen the four screws that hold
the hard disk drive bracket.
6. Take out the hard disk drive
bracket.
For CW01-WD
For CW01-WD
For CW01-WD
CW01 / CW01-WD installation complete
04
