SilverOnyx KJ150F-C02, User Manual, Page: 8 / 14

OPERATING INSTRUCTIONS
Start:
Aner main power is switched on, press the Power bujon. The
unit will beep and the Air Quality indicator Lamp will light up.
The purifier will start in AUTO mode and the
PM2.5 Indicator
will twinkle for several seconds before displaying the air quality
level detected by the sensor.
First Use:
For best results, we recommend first running your purifier in
manual mode on fan speed 3 thru 5 for several days to a week
(while away from the room, if necessary). Then switch to AUTO
to maintain clean air.
Auto Mode:
Press the Auto bujon when the unit is in another mode and it
will switch to Auto.
In Auto mode, the Auto Indicator will glow and the unit will
automaBcally adjust the air flow depending on the indoor air
quality. The Air Quality Indicator lamp will glow to the
corresponding level of air quality:
PM2.5 Levels:
0-50: Good
51-100: Moderate
101-200: Unhealthy
201-300: Very Unhealthy
301-500: Hazardous
Colour of the Ring Blue Yellow/Green Purple Red
Air Quality Good Moderate Polluted Poor
8