ECHO MANUAL v1.111
Page 37 of 47
2.5.2 NTP Client
NTP means Network Time Protocol. NTP can set the time as the same on all units.
Figure 2-44 NTP Client
▪
NTP Client:
Set NTP Client service as enable or disabled, the default is set to disabled.
▪
NTP Server:
Set IP address or domain name of NTP Server.
2.5.3 Dynamic DNS
2.5.4 Wireless Client Rate Limit
Figure 2-46 Client Rate Limit-All Clients
▪
CIR:
CIR means Committed Information Rate in other words bandwidth rate limit, kbps is the
unit of measure.
▪
Outbound:
Set the outbound rate limit value this is the limited rate of Transmitting.
▪
Inbound:
Set the inbound speed limit value this is the limited rate of the receiving RF.