Silverline R12093W01, User Manual

Page: 27 / 40

Installing Your N
Positioning:
Position the appliance away fr
of stoves, radiators, direct su
Maximum performance and
guaranteed by maintaining
indoor temperature for the cl
concerned as specified on the
This appliance performs well
ST . The appliance may not w
if left at a temperature above o
indicated range.
Climate class Ambient tem
SN +10°C to
N +16°C to
ST +16°C to
T +16°C to
Appliance must not be expose
Sufficient air must be allowed
in the lower rear section of
poor air circulation can affect p
Built-in appliance should be
away from heat sources such
fires or heaters.
Installation instructions:
Before installing, carefully
instruction in order to avoid
number of problems.
This is Dimensions of mountin
New Appliance
away from sources
direct sunlight etc.
ance and safety are
aintaining the correct
re for the class of unit
cified on the rating plate.
rforms well from SN to
may not work properly
ture above or below the
Ambient temperature
+10°C to +32°C
+16°C to +32°C
+16°C to +38°C
+16°C to +43°C
t be exposed to rain.
st be allowed to circulate
section of appliance, as
can affect performance.
should be positioned
sources such as stoves,
nstructions:
, carefully read the
er to avoid a certain
s of mounting slot.
Follow the steps in the
guide provided.
Note: Your product is design
for domestic household use
product must be correctl
located and operated in acco
the instructions contained
Instructions guide provided.
Reversing the fridge door
The side at which the door o
changed, from the right side (a
the left side, if the installation si
Warning! When reversing th
appliance must not be conn
mains. Ensure that the plug is r
the mains socket..
Tools you will need(Not provid
Philips Screwdriver &
Slotted Screwdriver
Wre
Note:
When required, tilt the refrige
order to gain access to the
should rest the appliance
packaging or similar mater
damaging the backboard
refrigerator. To reverse the
following steps are
recommended.
1. Stand the refrigerator uprig
door, remove the upper hing
and right). Remove the lowe
cover for the cabinet. Remov
hole cover for the door.
in the installation
uct is designed and built
usehold use only. The
be correctly installed,
ated in accordance with
contained in the User
provided.
door
the door opens can be
right side (as supplied) to
installation site requires.
reversing the door, the
ot be connected to the
t the plug is removed from
d(Not provided):
Wrench(8mm)
ilt the refrigerator back in
cess to the base, you
appliance on soft foam
milar material to avoid
backboard of the
reverse the door, the
ps are generally
erator upright. Open the
upper hinge cover (left
ve the lower screw hole
Remove the screw
6