![background image](http://html1.mh-extra.com/html/silverline/h10260-015/h10260-015_service-manual_1273795008.webp)
8
6.
Control Panel and Operation
Button Usage
1.
Press this button to turn on the product. Product will also run on 1st speed level when this button
is pressed. Fig. 13
2.
Product will run on 2nd speed level when this button is pressed Fig. 13
3.
Dig display You can follow which speed the product is currently working on this display. Fig. 13
4.
Product will run on 3rd speed level when this button is
pressed. Fig. 13
5.
Press this button to turn on and off the lamp. Fig. 13
6.
Pressing and holding any of the motor operation buttons for more than 2 seconds will initiate a
timer function of 15 minutes. A signal will be Displayed once the timer starts and the motor will stop
automatically after 15 minutes. Fig. 13
Cleaning Periods for Metal Filters:
Filters should be cleaned when "C" signal appears on the Display or (due to usage) every 2 or 3
weeks. To delete "C" signal after the filters are cleaned and replaced, press and hold ( ) button more
than 3 secs (when device is off). Letter "E" will appear on the Display and it will switch to normal
operation. If operation before deleting the "C" signal is required, active motor speed will appear for 1
sec when you press ( ) button and then the motor will resume running.
How to use 5 Spd Dig Touch Control Product
1.
Press this button to turn on the product. Fig. 14
2.
Press this button to decrease the motor speed. Fig. 14
3.
Dig display You can follow which speed the product is currentlyworking on this display. Fig. 14
4.
Press this button to increase the motor speed. Fig. 14
5.
When timer button is pressed, a 15-minute timer function will be activated; display will give a
signal once the timer starts and the motor will stop automatically after 15 minutes. Fig. 14
6.
Press this button to turn on and off the lamp. Fig. 14