manualshive.com logo in svg

Silverline FLOW-IN PRO, User Manual, Page: 5 / 50

Share
Download
Silverline FLOW-IN PRO User Manual Download Page 5

2 

Warnings

CAUTION!

Strictly follow the instructions specified on this

manual.

Before starting any installation procedure, the appliance must be

disconnected from the mains.

The installation or maintenance of the appliance must be carried

out by a qualified technician in accordance with the manufacturer's

instructions and in compliance with the local regulations in force on

safety.

In case of damage due to incorrect connection, the appliance will

be out of warranty.

Do not repair or replace any part of the appliance, unless it is spe-

cifically stated in the user manual.

CAUTION!

The appliance is not suitable for use in sockets

without grounding.

The power cable must be long enough to allow the appliance to be

connected to the mains.

In order for the installation to comply with the current safety regula-

tions, a standard-compliant switch is required, which ensures com-

plete disconnection of the network under overvoltage category con-

ditions.

Do not use multiple sockets or extensions.

After completing the installation, the user should no longer be able

to access the electrical components.

The areas touched during use are hot. Keep children away from

the appliance and under supervision.

The appliance can be used by children under 8 years of age, per-

sons with limited physical, mental and emotional abilities, and per-

sons with incomplete experience or knowledge only if they are

under the supervision of a responsible person or have been

informed about the safe use of the appliance and the dangers that

may occur.

Cleaning and maintenance should not be done by children without

supervision.

Before using the induction stove, people with pacemakers and

active implants should check whether their appliance is compatible

with the appliance. It is not possible to guarantee that 100% of the

appliances on the market will fulfil the electromagnetic compatibility

criteria in force and will not cause interference that will jeopardize

the correct operation of the appliance. It is also possible that

people wearing other appliances such as hearing aids may experi-

ence some discomfort.

Warnings

 

11.02.2021

FLOW-IN PRO USER MANUAL EN

5

Summary of Contents for FLOW-IN PRO



















































Reviews:

No comments