![background image](http://html1.mh-extra.com/html/silverline/ariel-downdraft/ariel-downdraft_user-manual_1273793019.webp)
8
ASSEMBLY OF PRODUCT
Fig. 14
n
Parts inside the appliance may
have sharp edges. Use protective
L
CAUTION
–
The furniture that the appliance
will be mounted on should be
resistant to 90°C temperature.
–
The durability of the furniture
that will be mounted on should
also be ensured after the cutting
operations have been com-
pleted.
–
Particularly in thin plates the
carrying capacity and durability
should be provided with suit-
able support parts. Consider the
weight of the appliance by
including additional loads. The
reinforcing material used should
be heat and moisture resistant.
The weight of the appliance is
specified in the label on the
package.
–
Clean the sawdust after cutting.
Cover the cut surfaces so that
they are heat resistant and
waterproof.
–
The cross-sectional surface
angle to the working plate
should be 90°.
ASSEMBLY OF PRODUCT
02.05.2019
DOWNDRAFT Hoods
20