SilverCrest SWKD 2400 A1
English - 33
Press the keep-warm button
(8) in order to activate the keep-warm function for the selected
target temperature. You can also adjust this target temperature to a value between 40°C and
90°C in increments of 5°C by pressing the
(11) or
(10) buttons. The
icon flashes
next to the degree sign on the right side of the display (12) when the keep-warm function is
activated. The display (12) is lit up in blue and the selected target temperature flashes while the
water is being heated. As soon as the water reaches the selected target temperature, this
continuously flashes in the display (12). You can deactivate the keep-warm function at all times
by pressing the on/off button
(9) or the keep-warm button
(8). The keep-warm function
lasts for a maximum of two hours. The pot (3) then automatically switches off.
As soon as the pot (3) is lifted off the base (5), the pot automatically switches off and the
display (12) goes out.
Pull out the power cable (6) plug from the socket after the heating or keep-warm process is
complete. Remove the pot (3) from the base (5) and pour away the water.
DANGER of burn injuries
Never touch the housing of the pot (3) during and immediately after operation.
Only use the handle (7) to hold or carry the pot (3).
Hot steam is released when the water boils. Make sure not to burn yourself.
Wear an oven glove, if necessary. Turn the
pot (3) so that the steam is directed away from you.
