Silvercrest SWKC 2400 A1, User Manual And Service Information

Page: 16 / 82

SilverCrest SWKC 2400 A1
14 - English
Troubleshooting
If your electric kettle does not work as normal, follow the instructions below to try to solve the problem. If
working through the tips below does not fix the fault, please contact our hotline (see "Warranty
information" on page 15.
Problem Possible causes Remedy
Electric kettle does
not work. The mains plug is not
connected. Connect the mains plug to a live wall outlet.
The electric kettle is not
switched on. Press the On/Off Switch (4) down into the "I"
position to switch on the electric kettle.
The appliance has overheated
and the overheating protection
is preventing it from switching
on. Wait until the electric kettle has cooled down.
Fill the kettle (7) with at least 0.7 litres of water
up to the "0.7L MIN" metal strip located inside
the kettle (7).
On/Off Switch (4)
not engaging in "I"
position. The kettle (7) is not correctly
placed on the base (5). Place the kettle (7) correctly on the base (5).
Environmental regulations and disposal information
A symbol depicting a crossed-out rubbish bin on a product means it is subject to
European Directive 2012/19/EU. All electrical and electronic devices must be
disposed of separately from household waste at official disposal centres.
Do not dispose of the appliance in household waste or bulky waste collections.
Information on collection points and pick-up times can be obtained from your local
council or waste disposal company.
Dispose of all packaging in an environmentally friendly manner. Cardboard packaging can be taken to
paper recycling centres or public collection points for recycling. Any film or plastic contained in the
packaging should be taken to your public collection points for disposal.
Conformity
This appliance complies with the basic and other relevant requirements of the EMC
Directive 2014/30/EU, the Low-voltage Directive 2014/35/EU, the ErP Directive
2009/125/EC and the RoHS Directive 2011/65/EU. In order to receive the
complete EU declaration of conformity, please send an e-mail to the following e-mail
address: ce@targa.de