Silvercrest SWD 100 E2 Operating Instructions And Safety Advices Download Page 8

GB/IE/NI

Important  safety  instructions / Safety  system / Special  features 

Important safety instructions

field  strength:  max.  5000 V / m, 
magnetic field strength: max. 
80 A / m,  magnetic  flux  density: 
max. 0.1 milli-Tesla. Therefore 
please consult your physician 
and the manufacturer of your 
pacemaker before using this 
heated blanket.

   Do not pull, twist or kink the ca-

bles. The heated blanket may 
otherwise be damaged.

   Frequently check this heated blan-

ket for signs of wear or damage. 
If signs thereof are detected, the 
heated blanket was used improp-
erly or will no longer heat up, it 
must first be inspected by the man-
ufacturer before being switched 
on again.

   If the mains lead to the heated 

blanket is damaged it must be 
replaced by the manufacturer, its 
customer service centre, or a 
similarly qualified person to pre-
vent hazards.

   With the heated blanket switched 

on, never 

  –  place objects on it (e.g. suit-

cases or clothes baskets),

  –  place a heating source such 

as a hot-water bottle, heating 
pad or similar items on it. The 
heated blanket may otherwise 
be damaged.

   The electronic components inside 

the control unit will heat up whilst 
operating the heated blanket. 
For this reason, never cover the 
control unit or place it on the 
heated blanket during operation. 
This poses a risk of injuries and /  
or damage to the heated blanket.

   Always observe the information 

on start-up, cleaning and care, 
and storage.

   If you have additional questions 

on using our products, please 
contact our Customer Service 
Department.

   Safety  system

Note:

 The heated blanket features a safety system. 

The electronic sensor technology prevents the heated 
blanket from overheating across the entire surface 
by automatically switching off in the event of a mal-
function.
If the safety system switches the heated blanket off 
automatically as a result of a malfunction, the function 
display 

2

 on the control unit 

1

 will no longer light 

up, even when the heated blanket is switched on.

  

Please note that, for safety reasons, the heated 
blanket must not be used after a fault and must 
be returned to the service address indicated.

   Special  features

   This heated blanket features a 

super soft, hygienic fabric. The 
textiles used in this heated blanket 

satisfy the high human ecological requirements of 
Oeco-Tex Standard 100, as verified by the German 
Hohenstein Research Institute.

Summary of Contents for SWD 100 E2













Reviews: