Silvercrest SUP 128 A1, Operating Instructions Manual

Page: 21 / 55

18 SUP 128 A1
GB
IE
Show additional information
During playback you can view additional information about the track
(track name, album name, etc.) by pressing the
INFO button.
♦ Press the
INFO
button again to hide the additional information.
Alphabetic track search
You can search for MP3 tracks alphabetically.
♦ Press the
SEARCH
button.
♦ Press ▸▸
I
or button or the
I
◂◂ or button until the desired initial
letter or number of the track appears on the display . Then the fi rst track
appears, which starts with "A", for
example. If the medium does not contain
a track that starts with "A",
A-NOFILE
appears.
♦ Press
▸II/■
or ▸
II
, to start playback of the selected track.
Setting playback mode
♦ Press the
RPT/INTRO/RND
button or to switch between the following
settings:
– REPEAT ONE: The current track is repeated.
–
REPEAT ALL: All tracks are repeated.
– INTRO: The fi rst ten seconds of every track are played.
– RANDOM: The tracks are played in random order.
If any of these settings are activated, this will be indicated in the display.
NOTE
► If you stop playback, the playback setting will be reset.
Programming the playing order of the tracks
You can program a playback sequence for up to 10 tracks.
The programming can only take place with playback stopped.
Creating a list
♦ Press the PROG. or PROGRAM button. The display shows
PROG
and
P01001
.
P01
is the program slot number, and
001
is the selected
track number.
IB_60308_SUP128A1_LB6.indb 18 08.04.14 10:15