SilverCrest STV 30 A1
English – 25
8. Initial use
8.1 Switching the fan on and off
Proceed as follows to put the fan into operation:
•
Place the fan on a flat, stable surface.
•
Insert the plug into a properly installed socket.
•
Switch the fan on by selecting one of the three fan levels on the control panel (12):
o
Level 1, weak: Press button 1.
o
Level 2, medium: Press button 2.
o
Level 3, strong: Press button 3.
•
Switch the fan off by pressing button 0.
8.2 Oscillation
The fan can oscillate horizontally.
•
Press the oscillation pin (9) in to start oscillation.
•
Pull the oscillation pin (9) out to stop oscillation.
You can adjust the vertical angle of the fan manually.
9. Maintenance/cleaning
DANGER! Risk of electric shock!
•
Disconnect the fan from the mains before cleaning
commences.
•
Do not immerse the fan in water.
•
Do not allow any water or cleaning agent to enter the
fan.
Summary of Contents for STV 30 A1
Page 1: ......
Page 2: ......
Page 3: ...V 2 2 Deutsch 2 English 16 Français 29 Nederlands 46 Polski 60 Česky 74 Slovenčina 87 ...
