Silvercrest SSVS 1000 B2, Operating Instructions And Safety Instructions

Page: 9 / 20

■ 6
│
GB
│
IE
│
NI
│
CY
SSVS 1000 B2
CAUTION – PROPERTY DAMAGE!
►
Do not add any foods to the water bath unless they are
firmly sealed . Any water getting into the food will produce
unfavourable results or spoil the food .
►
Ensure that the appliance, the mains cable and the plug do
not come into contact with heat sources such as hotplates or
naked flames .
►
Never place the appliance near sources of heat .
►
Never open the housing . If you do, it can no longer be as-
sured that the appliance is safe, and the warranty will be
invalidated .
►
Allow the appliance to cool down completely before clean-
ing and stowing it away it .
►
In the case a malfunction occurs on the appliance, an error
code will blink on the display . When the error codes " Er1 ",
" Er2 ", " Er3 " or " Er6 " are displayed, switch off the appliance
immediately, pull the mains plug out of the socket and con-
tact the Service Hotline (see Section Service ) .
The error code display " Er4 " informs you that the appliance
is not in the water . Handle the appliance as described in
the Section
Preparing the appliance
. The error code
display will then go out .