background image

GB

6.

Operation

6.1

Basic operation

As a rule, the instructions describe opera-
tion with the remote control. You can also 
use the buttons on the device to perform 
the basic functions. 

Switching the device on/off

1. Turn the power switch 

POWER 6

 to 

ON.

2. Press 

ON/STANDBY 11

 on the device 

or  

ON/STAND-BY 40

 on the re-

mote control. The device starts with 
the last selected settings (mode, sta-
tion and volume) and the brightest dis-
play lighting. 

3. Press 

ON/STANDBY 11 

on the device 

or  

ON/STAND-BY 40 

on the re-

mote control again to switch the de-
vice to standby mode.

The device remains in standby mode even 
after it is switched off. Since the device 
continues to use a little power in this mode, 
switch off the device using the power 
switch 

POWER 6

 (

OFF

) if you are not us-

ing it for a prolonged period. You will then 
need to reset the clock and alarm time as 
well as any stored radio stations and 
sound settings.

Selecting mode

With the device switched on, press 

MODE 39

 to choose between the various 

modes. The following appears in the dis-
play:

-

iPOD:

iPod

-

AUX:

 

Device connected via 

AUX 

IN 9

-

RADIO:

 Radio

Display lighting 

Choose between three brightness levels 
for the display. 

Press 

SNOOZE/DIMMER 30

 to 

change the display lighting. This will 
not work if the alarm clock is currently 
sounding.

Switching off with SLEEP

You can use the sleep function to specify a 
time after which the device is to switch off.
1. Press 

SLEEP 34.

 A switch-off interval 

flashes in the display. 

2. Press 

SLEEP 34

 repeatedly to specify 

the switch-off interval (in minutes): 

120, 90, 60, 45, 30, 15, 10, 05, 00

 

(off).

3. Once the switch-off interval has been 

specified 

SLEEP

 appears in the dis-

play.

6.2

Sound settings

Volume

Set the required volume with 

VOL

 

+/ 

18 

on the device or with 

VOLUME

 

+/ 

31 

on the remote control. The setting 

is displayed (

VOL 00 

 30

) and stored 

until the device is switched off at the 
power switch 

POWER 6

.

Muting

Press 

 

24

 on the remote control to 

switch the sound on and off.

Tone controls

Set the required tone with 

BASS +/ 33 

and

 / 32 

on the remote control. 

The setting is displayed (

TREB, BASS: -05 

to

 +05

) and stored until the device is 

switched off at the power switch 

POWER 6

.

__DT53143_B6.book  Seite 8  Dienstag, 24. August 2010  5:14 17

Summary of Contents for SST 50 A1



















Reviews: