Silvercrest SSP 360 A1, Operation And Safety Notes

Page: 54 / 231

GB/IE 54
operation. The operating time may vary based on use
(speed).
Preparing the remote control
On delivery the remote control
10
already has a battery
installed. An insulating strip prevents early battery discharge.
Pull the insulating strip out of the battery compartment.
Replacing the remote
control battery
Open the battery compartment as shown in Fig. A.
Insert the included battery (CR2025). Please note the
polarity. The positive terminal (+) must face up.
Slide the battery compartment back into the remote
control
10
.
Indicator lights / displays
The LED indicator
7
will light up red whilst charging
and extinguish once the rechargeable battery is fully
charged.