Silvercrest SSE 4.5 A1, Operating Instructions Manual, Page: 10 / 64

GB
│
7 ■ SSE 4.5 A1
■ The "Battery" indicator
0
shows the charge level of the inserted batteries.
When only one bar remains on the "Battery" indicator
0
, you should change
the batteries soon.
Operation
1) Set the amount of soap you want to have dispensed each time. Press the
"+" or "-"
-
button repeatedly until the required setting appears on the
display. You can select between 4 soap quantities. The more drops are
shown on the "Soap quantity" indicator
! , the more soap is dispensed.
2) Hold your hand under the soap outlet .
The LED lights up and the appliance dispenses some soap.
3) As soon as the soap stops, the LED goes out. You can now withdraw
your hand.
4) If you plan not to use the appliance for a long time, press the "-" button -
repeatedly until "OFF" appears on the display :
NOTE
► If you want to remove a large amount of soap from the soap tank, you can
run the soap output for 30 seconds:
Press and hold both the "+"
and "-"
-
buttons for about 3 seconds.
The appliance will start dispensing soap and stop after 30 seconds.
Cleaning and maintenance
■ Switch the appliance off.
■ Wipe the appliance with a damp cloth. If required, use a mild detergent on the cloth.
■ If one of the sensors / becomes stained, clean it carefully with a damp cloth.
■ The LED cannot be replaced.