6
GB
5.3 Overview - Connections
CAUTION:
make sure that the soundbar and the devices
to be connected are switched off before you connect them.
Please also read the user instructions for the devices which
you are connecting.
NOTE:
the
HDMI (ARC)
|
8
connection is only able to
function if all components are ARC-enabled. If necessary,
old HDMI cables must be replaced with new ARC-enabled
ones.
• A subwoofer can be connected to the cinch socket of
the
SUB OUT
|
7
output. This is automatically con-
trolled by the device.
5.4 How to use
NOTE:
the device remains in standby mode after being
switched off. In this mode, the power consumption of the
device is low. Pull the power unit
|
11
out of the wall socket
to disconnect it from the mains.
• Connect the power unit
|
11
with an easily accessible
wall socket. The red LED
|
1
on the device lights up. The
device is now in standby mode.
6. Operation
NOTES:
• All adjustments can be conveniently carried out with
the remote control. The basic functions can also be car-
ried out with the buttons on the device. Operation of
the device in the instructions is usually described with
the remote control.
• If you use the
HDMI (ARC)
|
8
connection, the sound-
bar is usually switched on and off via the remote con-
trol of the connected device. The connected device
must support this function.
• The device switches into the standby mode, …
… if no Bluetooth
®
connection is established within
20 minutes or
… if it does not receive a signal for 20 minutes.
• Press the
POWER
button
|
28
to switch on the device
from standby mode.
• Press the
POWER
button
|
28
to switch the device
into standby operation.
6.1 Selecting the type of connection
1. Press one of the
AUX
|
18
,
LINE IN
|
27
,
HDMI
(ARC)
|
17
or buttons
|
15
to switch to the desired
connection (see “Overview - Connections” on
page 6).
2. On the audio device you can now start playback and
select and control the music tracks.
6.2 Sound settings
NOTES:
• Changes to the sound settings are acknowledged with
brief flashing of the LED
|
1
until the minimum/maxi-
mum value is reached.
• A level control of the treble sounds and basses is only
possible with the setting “Music“.
Controlling the volume
• During play, press the
VOL –/+
|
20
buttons on the re-
mote control or
VOL –/+
|
4
on the device. For a faster
change of the volume, you can also keep the buttons
pressed.
Muting the device
1. Press
MUTE
|
16
to switch off the sound. The LED
|
1
flashes.
2. To switch the sound back on, press
MUTE
|
16
again
or one of the
VOL –/+
|
20
/
|
4
buttons. The LED
|
1
lights up.
Input
Use
Remote
control but-
ton
LED
colour
AUX
IN
|
10
Connection with ste-
reo cinch cable
|
12
,
e.g. television set,
CD player
AUX
|
18
white
LINE IN
|
6
Connection with 3.5
mm stereo jack ca-
ble, e.g. MP3 play-
er, telephone
LINE IN
|
27
green
HDMI
(ARC)
|
8
Connection with
HDMI (ARC) cable,
e. g. to the HDMI-
ARC connection of
the television set, DVD
player
HDMI
(ARC)
|
17
yellow
Bluetooth
®
Radio connection,
e.g. smartphone
|
15
blue
BB72=B6RXQGEDUB%ERRN6HLWH0LWWZRFK$SULO
