Silvercrest SRH 240 A1, Operating Instructions Manual

Page: 9 / 24

SRH 240 A1 ■ 6 │ GB │ IE
Before straightening
■ The hair should be clean, dry and free of styling products. The only exception
to this are special products which facilitate hair straightening.
■ Comb the hair thoroughly before straightening so that there are no knots in it.
Operation
Switching on/off
NOTE
► The appliance will only heat up if the hotplates are pulled out. The
indicator lamp will light up even if the hotplates are pushed in if the
ON/OFF switch is set to "I".
► The hotplates must be free of dirt. Clean them before use if required
(see section "Cleaning").
The appliance is secured with the catch .
Press the hotplates together and pull the catch out.
Now you can open the hair straightener.
1) Insert the plug into a mains power socket.
2) Pull the two hotplates out completely.
3) Push the ON/OFF switch to the “I” (on) position. The indicator lamp
switches on. The appliance heats up. After about 3 minutes, the hair straight-
ener has heated up.
4) When you have finished styling your hair, push the ON/OFF switch to
the “0” (off) position. Pull out the plug and allow the appliance to cool down
completely.
5) Pull the two locking buttons in the direction of the arrow, so you can push
the two hotplates back in evenly.