9
SPM 2000 B2
GB
IE
Handling and operation
This section provides you with important information on handling and using the
appliance.
Before initial use
♦
Clean all accessories as described in the section “Cleaning” to remove any
possible production residues.
♦
Read these operating instructions carefully.
♦
Set up the appliance in accordance with the safety instructions.
♦
Open the safety catch
4
by moving the slider from the
position to the
position.
♦
Clean the appliance with a damp cloth as described in “Cleaning and Care”.
♦
Close the appliance.
♦
Insert the mains cable plug
3
in a properly connected and earthed mains
power socket which supplies the voltage stated in the”Technical data” section.
Allow the appliance to heat up for about 5 minutes on the maximum temperature
setting by turning the heat level control
2
as far as the right-hand stop.
NOTE
►
The fi rst time the appliance heats up, a small amount of smoke and odour
may be generated due to production-related residue. This is normal and is
completely harmless. Provide suffi cient ventilation; for example, by opening
a window.
♦
After heating, pull the plug out of the mains socket and allow the appliance to
cool down completely.
♦
Clean the appliance again with a damp cloth.
Operation
♦
Close the appliance lid using the handle
6
.
♦
Slide the fat collector tray
7
into the appliance.
♦
Replace the plug in the mains mains power socket. The green “Ready” control
lamp
5
lights up when the heat level control
2
is set to “0” (
•
).
♦
Set the desired level on the heat level control
2
. The green “Ready” control lamp
5
goes out and the red “Power” control light
1
lights up. As soon as the set heat-
ing level has been reached, the red “Power” control light
1
goes out and the
green “Ready” control lamp
5
lights up again.
IB_104005_SPM2000B2_LB3.indb 9
IB_104005_SPM2000B2_LB3.indb 9
16.01.15 10:14
16.01.15 10:14
Summary of Contents for SPM 2000 B2
Page 3: ...A B ...
