Silvercrest SMWC 700 B3, Operation And Safety Notes

Page: 12 / 51

12 GB/IE/NI/CY
Initial use
Remove all packaging materials as well as protective
films and check that all parts are complete and un-
damaged. Never remove the light beige Mica cover
1
in the cooking chamber of the product. This is
not a packaging material - its purpose is to protect
the magnetron. If the product is incomplete or dam-
aged upon delivery, please contact the manufacturer.
Choosing an installation site
Choose a level surface which ensures sufficient
free space for the aeration and ventilation of the
product (see Fig. C).
Make sure that the mains plug is easily accessible
so that it can be easily reached and unplugged
in case of danger.
Install the product as far away from radios and
televisions as possible. Operating the product can
cause disruptions in radio or television reception.
Preparing the product
Open the door
9
by pulling on the door
handle
8
.
Before first use, clean the product‘s cooking
chamber with a cloth and some lukewarm water.
Make sure that no residue is left when removing
all protective and adhesive films.
Place the turntable shaft
6
in the hole in the
base of the cooking chamber. Make sure to in-
sert the turntable shaft
6
into the hole as far
as it will go.
Place the turntable ring
5
into the well inside
the cooking chamber.
Do not operate
the product without a properly
inserted glass plate
4
.
Place the glass plate
4
on the turntable ring
5
and the turntable shaft
6
. In doing so, the three
glass points on the underside of the glass plate
4
must engage in the grooves on the turntable
shaft
6
.
Close the door
9
by pushing it shut. Make sure
that the door locking mechanism
7
clicks into
place.
Plug the mains plug into a professionally in-
stalled mains socket. Make sure that the mains
voltage corresponds to that of the product
(see “Technical data“).
Configuring default settings
Setting the time
When the product is operated for the first time or if
the electricity supply is interrupted, the display
2
shows “0:00“ and the time (24-hour display) must
be set.
Press the timer / clock button
11
twice.
The hour display will start to flash.
Turn the rotary control
13
to set the desired hour.
Then press the timer / clock button
11
again.
Turn the rotary control
13
to set the desired
minutes.
Then press the timer / clock button
11
again.
The time is now set.
Setting the child safety lock
You can activate a child safety lock by pressing
and holding the stop button
14
for approx.
3 seconds. A signal tone sounds and
appears in the display
2
. The product‘s buttons
now have no function. After approx. 3 seconds,
the time is displayed again, provided that it has
been set.
You can deactivate the child safety lock by
pressing and holding the stop button
14
again for 3 seconds. A signal tone sounds and
all functions are available again.
Use
Never operate
the product when empty!
Open the door
9
by pulling on the door
handle
8
.