SilverCrest SMT 3 A1
English - 49
8.5. Trimming eyebrows
•
Use the eyebrow trimmer attachment (5) Remove the
protective cover (4).
•
To obtain the desired cut length of 3 mm or 6 mm, adjust
the duo-comb attachment (8) on the blade (12)
accordingly. Also see
Fig. C
. There is a length marking
(8) on the duo-comb attachment.
•
Ensure that the duo-comb attachment (8) audibly clicks
into place.
The eyebrow trimmer attachment (5) must be kept
perpendicular to the surface of the skin to obtain
the desired cut length. Please note that when
fitting the eyebrow trimmer attachment (5) onto
the trimmer housing (3), the on/off switch (16)
must point away from the user.
•
Turn the multi-trimmer on.
•
Position the device perpendicular to the skin and move it
slowly and evenly against the direction of hair growth.
Repeat this process until the desired trim is obtained.
•
If you need to remove individual hairs, adjust the blade
angle and move it against the single hairs.
•
Turn the multi-trimmer off after use.
•
Replace the protective cover (4).
8.6. Trimming small beards and sideburns
•
Use the beard contour trimmer (9).
