Silvercrest SMLM 807 A1, User Manual

Page: 59 / 70

Wireless Multimedia Laser Mouse SMLM 807 A1
English - 57
Connecting the USB Nano Receiver
If your previous mouse is still connected to the computer, please shut down the
computer, disconnect the appliance and then restart the computer.
Connect the USB Nano Receiver (12) to a free USB port of your running
computer.
The operating system will automatically recognize the new hardware and
install the required drivers. Depending on the operating system installed, the
following screen messages may appear:
Windows
®
XP
When the receiver is connected for the first time, the operating system
displays the message „New hardware detected“. Wait until the message
„The new hardware has been installed and is now ready for use“ is
displayed before using your wireless laser mouse.
Windows Vista
®
, Windows
®
7
When the receiver is connected for the first time, the operating system
displays the message „Installation of appliance driver software“. Wait until
the message „The appliances are ready for use now“ appears. The wireless
laser mouse is now operational and ready to be used.