GB
│
IE
│
NI
│
13
■
SLE 265 B3
Selecting programmes
The appliance has 4 distinct programmes.
♦
Press the MODE BUTTON
24
repeatedly to set the desired programme.
The programme LED
14
of the set programme lights up.
TARGET HUMIDITY
This programme offers you the option of setting the desired air humidity level.
♦
Press the arrow button
22
or
23
to set the desired humidity in 5%
steps between 30% and 80%. The set value flashes for approx. 5 seconds
on the display
15
and then the current relative humidity is shown again.
Additionally, you also have the option to select the setting
if you want to
make a setting below 30% relative humidity. This setting allows you to achieve
a very low humidity as the dehumidification runs permanently.
NOTE
►
The minimum humidity that can be achieved in the
mode is dependent
on many factors, such as the room size or the ambient temperature, etc.
Therefore it is not possible to define a generally applicable minimum value.
AUTOMATIC
The relative humidity that should be achieved is set permanently to 55%. The
appliance dehumidifies until this value is achieved and then switches off. If rela-
tive humidity increases again, the appliance switches on again. Changes in the
desired humidity are not possible in this programme.
Select this programme for sustained dehumidification at a comfortable relative
humidity of 55%.
