Getting started
27
Getting started
Switching on and off
The mains switch on the rear side of the receiver must
be in position „ON“.
Press the “ “ key of the receiver or the remote control
to change between standby and operation mode.
In operating mode, the green LED is lit at the front of the
receiver, in standby mode the red LED is lit.
Remote control
For the remote control two Micro type batteries
LR 03/AAA/1.5V are required (included in the scope of
supply).
Open the battery compartment.
Insert two batteries according to the polarities
mentioned into the battery compartment. Push the
cover of the battery compartment carefully until the
cover is locked.
