Silvercrest SL 35, Operating Manual

Page: 36 / 78

31
Getting started
Remote control
For the remote control two Micro type batteries
LR 03/AAA/1.5V are required.
Open the battery compartment.
Insert two batteries into the battery compartment -
paying attention to the indicated polarities and push
the cover of the battery compartment carefully until it is
locked.
The strap in the battery compartment is intended
to make it easier for you to take out the batteries.
If you place the strap under the inserted batteries,
you can remove them by simply pulling it out.
Replace discharging batteries on time. Otherwise, the
sending capacity of the remote control will be too low.
Always replace both batteries simultaneously and use
batteries of the same type.