11
GB
Adding ingredients
• You can add ingredients into the mixing
bowl
|
15
while the drive arm
|
22
is lift-
ed up.
• During mixing, you can add ingredients
through the filling opening
|
20
in the
splash guard
|
21
:
- Reduce the speed to
1 - 2
.
- Open the flap of the filling open-
ing
|
20
.
- Add the ingredients.
- Close the flap of the filling open-
ing
|
20
again.
Lowering the drive arm
9. Rotate the unlocking lever
|
10
upwards
in the direction of the arrow.
10.Move the drive arm
|
22
all the way
down. The unlocking lever
|
10
jumps
back to the vertically locked position.
The device is now fully assembled. On work-
ing with the device: see “Basic operation”
on page 12.
8. Using the blender jug
NOTE:
when you use the blender jug
|
5
, the
axle
|
23
also turns. The mixing bowl
|
15
and
splash guard
|
21
should therefore also be
mounted, but not a mixing tool.
Mounting the blender jug
1. Remove the cover
|
8
to the right.
2. Position the blender jug
|
5
on the drive
unit
|
7
so that the white arrow (
T
) on
the bottom of the blender jug points to
the open lock symbol.
3. Turn the blender jug
|
5
clockwise until it
is firmly in place. The white arrow (
T
)
now points to the closed lock symbol.
Adding ingredients
• First add the liquid ingredients to the
blender jug
|
5
, and then the solid ones.
• Cut the solid ingredients into small piec-
es in advance, so that the pieces do not
get jammed in the blades.
• During blending, you can add ingredi-
ents through the refill opening
|
3
in the
lid
|
2
:
- Reduce the speed to
1 - 2
.
- Rotate the lid of the refill opening
|
1
anticlockwise and remove it.
- Add the ingredients.
- Replace the lid
|
1
such that the small
plastic nibs fit into the recesses at the
refill opening
|
3
.
- Turn the lid
|
1
clockwise until it is firm-
ly in place.
Summary of Contents for SKMP 1300 C2
Page 2: ...English 2 ƧnjnjLjǎNJNjƽ 20 Deutsch 38 ...
Page 21: ...19 GB ...
