- 3 -
• Do not allow individuals (including children) to
use the appliance whose physical, sensorial or
mental abilities or lack of experience and know-
ledge hinder their safe usage of it if they have
not previously been supervised or instructed in its
correct usage.
• Tell children about the appliance and its potenti-
al dangers so that they do not play with it.
Starting Up the Device
• Before starting up the device, make certain that...
– the device, plug and power cable are in good
working order and...
– all packaging materials have been removed
from the device.
• Fill the device with water up to the MAX mark
and let it come to a full boil once as described in
the next section. Pour out this water.
Boiling Water
Danger! Never place the electrical base
near water – life-threatening danger!
Warning: For safety reasons, the lid
q
should not be opened while the water is
boiling or is very hot. Otherwise there is a
risk of injury.
• You should only heat as much water as you
need directly. That helps you save electricity, wa-
ter and time:
• Lift away the kettle
u
for filling!
• Open the lid
q
by pressing down on the unlok-
king button
w
.
• Hold the kettle
u
vertically while filling. Only
then will the level indicator
i
on the side
correctly indicate the water volume.
Fill the kettle
u
...
– at least to the MIN mark so that the device does
not overheat,
– no higher than the MAX mark so that no boiling
water spills out.
• First close the lid
q
...
• then place the kettle
u
on the base
t
until it sits
straight on the base
t
.
• Set the temperature controller
y
at the desired
position. To bring the water to a boil, you need
to place the temperature controller
y
in the coo-
king area at the MAX position.
• Now insert the power plug into the power
socket and press the ON/OFF switch
e
down
until it snaps in.
• The operating light
r
indicates that the device is
now heating up.
MIN
MAX
ke
ep
w
ar
m
ran
ge
bo
ilin
g
ra
ng
e
Transition-
range
IB_68892_SWKT3000A1_LB7 26.07.2011 13:45 Uhr Seite 3
