Silvercrest SHTR 2200 E3, Operating Instructions Manual

Page: 8 / 69

6
GB
DANGER! Risk of injury
through burning
~
Do not direct the flow of hot air into
eyes, onto hands, or onto any other
heat-sensitive body parts.
~
Do not touch the hot surfaces of the de-
vice.
~
Allow the device to cool down com-
pletely before you clean it or put it
away.
~
Allow all attachments to cool down be-
fore removing it from the device.
WARNING! Risk of material damage
~
Only use the original accessories.
~
Never place the device on hot surfaces
(e.g. hob plates) or near heat sources or
open fire.
~
Do not use any astringent or abrasive
cleaning agents.
~
Do not expose the device to tempera-
tures below -10 °C or above +40 °C.
4. Items supplied
1 hair dryer
1 styling attachment
| 11
1 diffuser | 12
1 curling attachment | 13
1 set of operating instructions
Attachment per model:
- grey hair dryer
Diffuser | 12 , styling attachment | 11
- blue hair dryer
curling attachment | 13 , styling attach-
ment | 11
- purple hair dryer
Diffuser | 12 , styling attachment | 11
5. Operation
NOTE:
• before using for the first time, switch the
device on for a few minutes and allow it
to run at the highest speed and tempera-
ture settings. As a result of the manufac-
turing process, you may notice a slight
odour. This is normal and only occurs
during first use. Ensure that the room is
well ventilated.
Switching on/off and adjusting
speed
1. Connect the mains plug | 5 with an easi-
ly accessible wall socket.
2. Using the on/off switch | 7 and the
switch for the speed settings, you can
switch the device on and select the de-
sired speed for the air flow:
0 = off
= slow; gentle air flow
= fast; strong air flow
3. After drying, switch the on/off switch | 7
to 0 (off) and pull out the mains plug | 5 .
Selecting the temperature
Use the switch for the hot air settings | 8 to se-
lect the desired temperature for the air flow:
= low temperature
= medium temperature
= high temperature
Cooling function
In order to improve the durability of your
hair style, you can cool the hair after it has
been styled with hot air using the but-
ton
| 9 | .
Keep the button | 9 held down during dry-
ing in order to get a cool air flow, irrespec-
tive of the starting temperature.
When you no longer require the cool air
flow, release the button
| 9 .
__NAS278227_Haartrockner_B6.book Seite 6 Mittwoch, 28. September 2016 1:23 13