Silvercrest SHD 7.4 A1, Operating Instructions Manual

Page: 24 / 256

SHD 7.4 A1
GB
│
IE
│
21 ■
3. Tap out the dust filter
5
and the filter housing
4
into a waste
bin.
4. Clean the dust filter
5
and the filter housing
4
in tap water and
leave them to air dry completely afterwards.
5. Reinsert the dust filter
5
in the filter housing
4
and turn it to the
left (in the direction of the symbol) until it is seated firmly in the
filter housing
4
(see Fig. 9).
6. Reinsert the dust filter
5
and the filter housing
4
into the dirt
container
3
. Always make sure that the dust filter
5
sits straight
in the dirt container
3
and the rubber lip seals the dirt container
3
.
7. Place the dirt container
3
back on the appliance. Make sure that
the two
▯
markings under the symbol on the dirt container
3
and on the edge of the appliance are aligned with each other
(see Fig. 6). Turn the dirt container
3
until the ▯ marking on the
edge of the appliance is under the symbol on the dirt container
3
and the dirt container
3
locks audibly into the appliance.
Cleaning the appliance
1. Clean the housing and the 2-in-1 suction nozzle
w
with a lightly
moistened cloth. For stubborn soiling use a mild detergent on the
cloth.
2. Remove hair, lint and threads from the brush nozzle of the 2-in-1
vacuum nozzle
w
.
3. Dry all parts thoroughly before using the appliance again or
storing it.
IB_359281_SHD7.4A1_LB8.indb 21 30.03.2021 12:37:43