Silvercrest SHAZ 21.6 B2, Operating Instructions Manual

Page: 10 / 39

8
GB
2. After every use,
hang the suction de-
vice
| 5 up in the
base station | 26 .
The LEDs of the
charging indica-
tor
| 34 are lit or start
flashing. Once all
LEDs are lit, the bat-
tery is completely
charged. With a full
charge, you can use
the vacuum cleaner
for approx.
20 minutes.
Connecting the suction device
directly to the mains
The suction device does not have to be in the
battery charger for the battery to be
charged.
• Plug the power adapter
| 31 into a suita-
ble wall socket and connect the power
cable directly with the charging sock-
et
| 6 on the underside of the suction de-
vice | 5 .
LED signals on the base station
- Lit LEDs show the current charging state.
- Flashing LEDs show the consumed por-
tion. When all LEDs are flashing, you
should charge the battery. With an in-
sufficient charge, the device will stop
working.
LED signals during operation
- Lit LEDs show the current charging state.
- Unlit LEDs show the consumed portion.
- Only the LED above Empty is flashing:
battery weak; the device will turn off
soon.
7. Assembly
With its extensive accessories, there are nu-
merous options enabling you to react per-
fectly to almost any conceivable requirement
on a vacuum cleaner. In this section, we de-
scribe the assembly for the most frequent ap-
plications.
CAUTION:
~
During all assembly steps, the vacuum
cleaner must be switched off.
7.1 Engaging and disengag-
ing connections
There are two ways to mount and dismantle
parts.
The suction pipe | 20 , the floorhead | 22 , the
dust container | 11 , the filter covers | 4 and
the battery | 33 are inserted until they en-
gage audibly. Press the respective release
button to disengage the connections.
All other parts are pushed on and pulled off.
If necessary, slightly rotate the parts in oppo-
site directions.
7.2 Prior to every use
Prior to every use, the following parts must
be assembled:
Filter unit
The filter unit consists of:
the filter carrier
| 8 , the
metal filter | 12 and the
paper filter | 7 .
• Always insert the
complete filter unit
into the dust contain-
er
| 11 .
| 20
| 5
| 26
| 7
| 12
| 14
| 11
| 8