SFPW 360 B1
GB
│
IE
│
37
■
Use
Requirements for the set-up location
NOTE!
►
When choosing a location for the appliance, en-
sure that the appliance is not subjected to direct
sunlight, vibration, dust, heat, cold and moisture.
►
Do not set up the appliance in the vicinity of
heat sources, such as radiators.
►
Protect sensitive surfaces before setting up the
product.
♦
Place the appliance on a flat and level surface.
Connecting to a power supply
This device can be operated with batteries or the
mains adapter. For a permanent projection, permanent
display illumination and to use the USB port
3
,
the mains adapter
1
must be connected.
Mains power operation:
♦
Ensure that the On/Off switch for permanent projec-
tion
is in the "
OFF
" position.
♦
Plug the low voltage plug on the mains adapter
0
into the connector socket
3
on the appliance and
connect the mains adapter
0
to an easily accessi-
ble mains plug.
Battery operation:
♦
Open the battery compartment
-
on the rear of
the appliance by removing the battery compart-
ment cover
!
.
♦
Insert three AAA batteries into the battery compart-
ment
.
as indicated.
♦
Close the battery compartment
-
again.
