SFA 40 A1
GB
│
IE
│
41
■
Activating/deactivating the multipoint function
The multipoint function is activated by default on delivery .
To disable the multipoint function:
♦
In standby mode, press the button for approx . 3 seconds .
The operating LED lights up briefly orange before going
out completely . You will hear a low beep, followed by a series
of beeps decreasing in pitch . The hands-free set switches off
and multiple mobile phones can no longer be paired with the
device .
To enable the multipoint function:
♦
In standby mode, press the button for approx . 3 seconds .
You will hear a rising series of beeps . The hands-free set can
now be paired with several mobile phones .
Call function
♦
Use your mobile phone to make a call in the usual way .
♦
To redial the last used number, press the multifunction button
twice in quick succession .
♦
To activate voice dialling, press the multifunction button
once briefly .
NOTE
►
Voice dialling is only available with mobile phones that support
this function . For more information on voice dialling, refer to the
instruction manual of your mobile phone .
Summary of Contents for SFA 40 A1
Page 3: ......
