18 GB/IE/NI
Hold down the
button
8
and the product switches to standby
mode. The colour LCD
1
shows the current date and time
1b
, as
well as the alarm settings for alarm 1
1g
and alarm 2
1f
.
Set the main switch
3
on the right side of the product to the
“Off“ position to switch the product off completely.
Note:
When the power supply
15
is plugged into a mains socket it
uses a small amount of electricity, even if the product is not connected
to the power supply
15
or is switched off.
Switching on / off when battery powered:
Fully extend the antenna
7
for good reception.
Set the main switch
3
on the right side of the product to the “On“
position.
Then press the
button
8
to switch the product on. When using
the product for the first time it will automatically scan for DAB+ sta-
tions after being switched on. After the DAB+ station scan has com-
pleted, the product will select the first available DAB+ station and
start playing it. By default, the DAB+ stations are listed in numeri-
cal and alphabetic order.
Press the
button
8
to switch the product off.
Set the main switch
3
on the right side of the product to the “Off“
position to switch the product off completely.
Note:
The station list is automatically saved so the product does
not need to scan for DAB+ stations the next time it is switched on.
After being switched on, the product will automatically start play-
ing the last DAB+ station selected.
Note:
You can manually scan for DAB+ stations at any time or
start an automatic station scan as described in chapter “DAB+
station scan“.
Summary of Contents for SDRF 10 B1
Page 4: ...C 14 8 9 10 11 12 13 7 15 16 ...
Page 48: ...48 ...