Silvercrest SDI 3500 B1, Operating Instructions And Safety Instructions

Page: 57 / 210

SilverCrest SDI 3500 B1
English - 55
Problem Possible cause Remedy
Error E3 is shown on
the display (8) Heating zone (1, 3)
temperature too high Wait a few minutes until the heating zone (1 or
3) has cooled down.
Empty pan Fill the pan with food.
Error E6 is shown on the
display (8) Cooling fan faulty Contact our hotline. See the "Warranty
information" on page 55.
Error E1, E2, E4, E5,
E7, E8 or Eb is shown
on the display (8) Technical fault Contact our hotline. See the "Warranty
information" on page 55.
10. Environmental regulations and disposal information
A symbol depicting a crossed-out rubbish bin on a product means it is subject to European
Directive 2012/19/EU. All electrical and electronic appliances must be disposed of
separately from household waste at official disposal centres.
This appliance may not be disposed of as domestic waste. Information on collection points
and pick-up times can be obtained from your local council or waste disposal company.
Dispose of all packaging in an environmentally friendly manner. Cardboard packaging can
be taken to paper recycling centres or public collection points for recycling. Any film or plastic
contained in the packaging should be taken to your public collection points for disposal.
11. Conformity notes
This appliance complies with the basic and other relevant requirements of the EMC
Directive 2014/30/EU, the Low Voltage Directive 2014/35/EU, the ErP Directive
2009/125/EC with Implementation Ordinance 66/2014, Appendix I, Sections 2
and 2.2 and the RoHS Directive 2011/65/EU.
The complete EU Declaration of Conformity is available for download from this link:
www.targa.de/downloads/conformity/292012.pdf