Silvercrest SDB 2400 F4, Operating Instructions Manual

Page: 40 / 60

SDB 2400 F4
GB
│
MT
│ 37 ■
Ironing with steam blast
■ The steam blast function is especially suitable for smoothing difficult­to­reach
parts of a garment .
HINWEIS
► The temperature control
8
must be turned to at least the setting range .
Otherwise no steam will be produced .
1) Raise the steam iron slightly .
2) For a steam blast, press the steam blast button
4
. You can also use the
steam blast function to smooth hanging textiles .
3) Hold the iron vertically and press the steam blast button
4
.
Pausing operation of the steam iron
WARNING – RISK OF FIRE!
► Never leave a hot steam iron unattended if it is switched on or connected
to the mains power supply .
1) Move the temperature control
8
to the "MIN" position .
2) Stand the steam iron only on the base
0
.
After use
■ Remove the plug from the mains power socket .
■ Empty the water tank and clean the sole of the iron
q
.
■ Place the cooled­down steam iron on the base
0
.
Drip-stop function
With conventional steam irons, water can drip from the sole of the iron
q
at
low temperatures . This iron however, possesses a new feature, the DRIP­STOP
function . At low temperatures, the iron automatically switches off the steam­
blast function . When this happens, you will hear a "CLICK" . Then set a suitable
temperature with the temperature control
8
. As soon as this is reached, steam
production is resumed .