SilverCrest SBLL 4.2 A1
36 - English
* An acoustic signal is played when the maximum
volume is reached.
1
You will hear a confirmation tone in the speaker.
Subsequently the Bluetooth
®
connection has to be re-
established.
Radio mode
The speaker has a radio function. Proceed as follows to
use the speaker in radio mode.
Connect the supplied USB charging cable (B) to the
micro-USB charging port (9) on the speaker. The USB
charging cable (B) is used as the antenna in radio
mode.
Turn the speaker on by setting the ON/OFF switch
(6) to the ‘ON’ position. You will hear a series of
sounds that gradually increase in volume. ‘bLUE’ is
shown on the display (1).
Briefly press the M button (3) to switch to radio
mode. The most recently used radio frequency is
shown on the display (1).
To start automatic station scanning, briefly press the
button (2). Automatic station scanning always
begins with the lowest frequency.
The speaker now scans the entire frequency range for
stations with a strong signal. As soon as a station with
a strong signal is found, the frequency indicator
briefly freezes on the display (1) and the memory
position where this station will be stored is displayed
for a short time.
