14 US-EN
Connecting the headphones to a second
Bluetooth
®
device
The headphones may be connected to two Bluetooth
®
communication devices
at the same time. If the headphones are already connected to a device, follow
the steps below to connect the second device:
Activate multipoint mode by pressing and holding button
6
for 3 seconds.
Acoustic signal sounds. The first communication device (cell phone or com-
puter) is disconnected.
Now connect the headphones to the second communication device via
Bluetooth
®
. Please refer to the notes in the instructions for your communication
device. Select the entry “SBKP 1 A1“ from the list of devices detected by
your computer or mobile device. The second communication device is con-
nected.
Briefly press button
6
and an acoustic signal sounds. The first commu-
nication device is reconnected. Now, both communication devices are
connected to the headphones simultaneously.
Clearing paired devices
In paired mode (the LEDs will briefly flash blue twice every 3 seconds),
press and hold button
6
for 3 seconds and an acoustic signal sounds.
The headphones are now in pairing mode. The LEDs
2
flash red and blue.
Simultaneously press and hold button
6
and button
4
for 2 seconds
and two beeps sound.
The memory in the headphones is cleared and it will not auto-connect to
the previously paired communication device.
Connecting the headphones via audio cable
Insert the 0.14 inch (3.5 mm) plug at one end of audio cable
14
to
0.14 inch (3.5 mm) socket
10
.
