38
G
2�
Unscrew the fixing element (10) of the thermostat head
and remove the thermostat head�
Installing the New Thermostat Head
To fit the device to Danfoss radiator valves, you need one
of the adapters provided� To determine which adapter (14)
fits which radiator valve, please refer to Fig. 2-4 on the fold-
out page�
Caution!
During assembly, be careful
not to jam your fingers between the
halves of the adapter!
Caution!
The adapters supplied are
joined together with plastic tabs� Edges
which have been snapped off can be
sharp� Break out the plastic tabs carefully
and smoothen the sharp edges on the
adapter you use with a suitable tool�
The notches (13) on the circumference ensure the adapter
fits perfectly.
1�
If required, slip the adapter (14) that fits the radiator
valve onto the valve until the adapter snaps into place�
Summary of Contents for RT2000
Page 53: ...55 G ...
Page 54: ......
