Silvercrest RC DP3 4001-A GB 3726, Operation And Safety Notes

Page: 12 / 25

12 GB/IE/NI
Prob-
lem The operating indica-
tor
1
on the remote
control device illumi-
nates but there is no
reaction
Rem-
edy · Check if the battery still
has sufficient Ampere. If
necessary, install a new
battery.
Prob-
lem
No indicator light
1
on remote control
when pressing “ON”
or “OFF”
Rem-
edy · Check if the battery is
inserted correctly.
· Check if the battery has
good contact, if neces-
sary press down.
Prob-
lem No reaction from
consumer
Rem-
edy · Check that the appliance
is switched on.
· Assign a new code to
the wireless socket (see
“Setting up the wireless
socket”).
· Check - by walking closer
to it - that the range is
correct for the desired
location.
Prob-
lem Range is too small
Rem-
edy · For large ranges, ensure
that as few walls and as
little furniture as possible
are in the way of the
remote control and the
radio-controlled socket.
· If the range is too small
at times, the reason could
be a remote control which
works on a similar fre-
quency. Whenever this re-
mote control is active, the
range declines (e.g. wire-
less headphones, radio-
controlled movement
alarms, radio gongs etc.).
Q
Cleaning
Before cleaning, always disconnect
the radio-controlled socket from the
wall socket and remove all power
plugs from the device.
Ensure that no liquids get into the
inside of the device. Use a soft cloth
to clean the housing. Never use
petroleum, solvents or cleaners
which corrode plastics.
Q
Disposal
Electrical appliances
must not be disposed
of with domestic waste.