Silvercrest mp10, User Instructions, Page: 10 / 24

English SilverCrest MP10
8
Switching the wireless mouse on and off
You can switch the wireless mouse on and off using the synchronizer button
(3) on the underside of the mouse. To switch off the mouse: press the
synchronizer button and briefly keep it pressed until the optical sensor (2)
briefly flashes. Press the synchronizer button once to switch the mouse back
on. Renewed radio synchronization is not necessary after switching back on.
Energy saver mode
The wireless mouse is equipped with an energy saver mode to spare the
rechargeable batteries. If you do not use the mouse for several minutes it
automatically switches itself off. Then press any button on the wireless mouse
to switch it back on.
Charging the rechargeable batteries
To recharge the rechargeable batteries: insert the wireless mouse with the
inserted rechargeable batteries in the charger unit (see figure on page 6). The
charge indicator light (13) lights up during the charging process and goes out
when the charging process is finished.
The operating voltage required for charging is supplied via your computer's
USB connection. Depending on your computer model, the operating voltage at
the USB connection is switched off when the computer is switched off. You
can only charge the wireless mouse's rechargeable batteries if the computer is
switched on. Optionally, you can use an external, active USB distributor (hub),
to charge the wireless mouse even if the computer is switched off (not
included in the scope of supply).
i