Silvercrest LT910, User Manual And Service Information

Page: 266 / 323

SilverCrest LT 910
5 - English
•
the device is not subject to any great temperature changes as this may cause
moisture through condensation and short-circuit;
•
the device should not be subject to excessive shocks and vibrations.
Warning: Risk of Hearing Damage!
When using headphones at extremely high volume levels,
permanent damage to the ears may occur.
Notice on Mains Separation
The On/Standby button does not fully disconnect the device from the mains.
Furthermore, the device consumes electricity in the Standby mode. In order to
completely disconnect the device from the mains, the power adapter must be
pulled out from the wall outlet. For this reason, the device should be positioned in
a way that assures unobstructed access to the power outlet so that the power
adapter can be immediately pulled out in an emergency situation. To avoid the
danger of fire if the power adapter is not going to be used for a long while (e.g.
during holidays) it should always be disconnected from the power socket. Before
stormy weather when there is the danger of lightning, disconnect the power
adapter from the mains and also pull out the antenna plug or the rod antenna.
Batteries
Insert the battery with the correct polarity into the remote control. Never try to
recharge the battery and under no circumstances throw it into fire. Remove the
battery when the remote control is not to be used for a long time. Non-intended
use may cause explosion and danger to life.
Respect the environment. Old batteries do not belong in with domestic waste.
They must be handed in to a collection point for old batteries.
Cables
Unplug all cables by holding the plugs and never pull on the cables themselves.
Never place the appliance, pieces of furniture or other heavy objects on the
cables and take care that these do not become trapped, especially at the plug
and socket. Never make knots in the cable and do not tie it together with other